Xtratherm FR/MG Single Ply Partially Bonded Built-Up Felt Systems - 150mm (Pack of 2)

Xtratherm FR/MG Single Ply Partially Bonded Built-Up Felt Systems - 150mm (Pack of 2)

  • Documentation
  • 0 reviews
    £105.4 EX VAT £126.48 INC VAT

    Additional Info

    Product Code:
    • Application:
      Insulation for Single Ply Fully Adhered / Partially Bonded Built-Up Felt Systems
    • Type:
      High Performance PIR Insulation
    • Product Size:
      1200mm x 600mm
    • Thickness:
    • Pack Coverage:
      1.44m2 (Pack of 2)
    • Estimated Delivery:
      2-3 Working Days

    Product Description

    Xtratherm FR/MG Single Ply Partially Bonded Built-Up Felt Systems - 150mm (Pack of 2)

    Xtratherm FR/MG Insulation for Single Ply Fully Adhered / Partially Bonded Built-Up Felt Systems

    Xtratherm FR/MG is a high performance Polyisocyanurate with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt.

    Thickness: 150mm (Pack of 2)
    All Thickness: 50,60,70,80,90,100,110,120,130,140,150mm
    Length: 1200mm
    Width: 600mm
    Pack Coverage: 1.44m2
    Density(Foam Core): 30kg/m3
    Weight: 6.48kg
    Thermal Conductivity: 0.025W/mK
    Thermal Resistance: 5.60m2K/W
    Compressive Strength: 150kPa
    Roof Design: Consideration should be given to the recommendations of BS 4841: Part 3 and those of the Single Ply Roofing Association.
    Fire Performance: The fire rating when testedto EN 13501-5 and BS 476 Part 3 ‘External Fire Exposure Roof Test’ will be dependent upon waterproofing system specified.

    High Thermal Performance
    Compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed or adhered boards.

    Vapour Control Layer
    A continuous approved vapour control layer should be used below the insulation.  (Unless over a sealed metal deck system). For mechanically fixed boards, a minimum vapour control layer of a 1000 gauge polythene layer lapped and sealed with double-sided tape should be used below the insulation. At vertical upstands and penetrations, the VCL should be turned up and sealed to encapsulate the insulation layer prior to the roof finish being completed. (A comprehensive U-value calculationand condensation risk analysis should be carriedout for all projects)

    Bonding boards to  the vapour control layer
    The minimum vapour control layer should consist of a 3B type felt to BS747 Reinforced bitumen sheets for roofing. Specification or BS8747. Reinforced bitumen membranes (RBMs) for roofing. Guide to selection and specification.Other proprietary systems may be used subject to approval.Where the vapour control layer is to be bonded separately, sufficient adhesion to the substrate should be made to ensure correct resistance to wind uplift. Contact the system manufacturer  for details.

    Membrane Systems
    Please contact Xtratherm Technical Support for advice on membrane and adhesive system compatibility. Technical guidance from the appropriate waterproofing manufacturer should be sought.

    Xtratherm FR/MG boards are suitable for use  on roof decks that are subject to maintenance traffic.Walkways should be provided on roofs requiring regular pedestrian access. When the  roof is complete, protective boarding should be laid if additional site work is to be carried out.

    Product Range
    Xtratherm Thin-R range is a high performance foil faced Polyisocyanurate (PIR) insulation with a certified thermal conductivity as Low as 0.022 W/mK. Thin-R is also available with engineered jointing to provide improved continuity and thermal bridging performance.

    Xtratherm FR/MG Single Ply Partially Bonded Built-Up Felt Systems - 150mm (Pack of 2)

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Get best price of Xtratherm FR/MG Single Ply Partially Bonded Built-Up Felt Systems - 150mm (Pack of 2)?

    When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

    The total time it takes to receive your order is shown below:

    The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

    Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

    Shipping from your local warehouse is significantly faster. Some charges may apply.

    In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

    All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

    Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

    While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

    Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

    pdf brochures
    Size Chart