229889728003396
25mm Kingspan Thermawall TW55 Board

25mm Kingspan Thermawall TW55 Board

  • Documentation
  • 0 reviews
    £20.44 EX VAT £24.53 INC VAT

    Additional Info

    Brand:
    Kingspan
    Product Code:
    C-306
    • Application:
      Insulation for steel and steel timber framing systems
    • Type:
      PIR insulation board
    • Product Size:
      2400mm x 1200mm
    • Thickness:
      25mm
    • Pack Coverage:
      2.88m2
    • Estimated Delivery:
      2-3 Working days

    Product Description

    25mm Kingspan Thermawall TW55 Board

    Kingspan Thermawall TW55

    Kingspan Thermawall TW55 is a high performance insulation with a fibre-free rigid thermoset polyisocyanurate (PIR) core.It is used to insulate timber and steel framing systems, and has a thermal conductivity of 0.022 W/m·K.


    Image result for Thermawall TW55

      -Thickness: 25mm
      -Available Thickness :  20mm,25mm,30,mm,40mm,50mm,60mm,
      -70mm,75mm,80mm,100mm,120mm,125mm,150mm.
      -Width: 1200mm
      -Length: 2400mm
      -Density: 32kg/m3
      -Weight: 2.30kg
      -Thermal Conductivity: 0.022W/mK
      -Thermal Resisatance: 1.10m2K/W
      -Coverage: 2.88m2
      -Spread of Flame: Class 1
      -Compressive Strength: 140kPa    
      -Water vapour resistivity: 100MN.s/g.m


    Specifications
    - High performance rigid thermoset insulation – thermal conductivity 0.022 W/m.K 
    - Can be used between studs or as an insulating sheathing
    - Suitable for use with timber frame and steel frame wall constructions 

    - Unaffected by air infiltration

    - Resistant to the passage of water vapour

    - Easy to handle and install

    - Ideal for new build or refurbishment 

    - Non–deleterious material 
    - Manufactured with a blowing agent that has zero ODP and low GWP

    Product Details
    The Facings
    Kingspan Thermawall® TW55 is faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. This reflective, low emissivity surface improves the thermal resistance of any unventilated cavity adjacent to the board.

    The Core
    The core of Kingspan Thermawall® TW55 is manufactured with Nilflam® technology, a high performance fibre–free rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP).

    Sustainability & Responsibility
    Kingspan Insulation has a long–term commitment to sustainability and responsibility: as a manufacturer and supplier of insulation products; as an employer; as a substantial landholder; and as a key member of its neighbouring communities.

    NBS Specifications
    Details also available in NBS Plus. NBS users should refer to clause(s): F30 155, P10 210, K11 495 (Standard and Intermediate) F30 12, P10 40 (Minor Works).

    Water Vapour Control / Condensation
    Condensation can be controlled, in constructions containing Kingspan Thermawall® TW55, by ensuring there is a layer of high vapour resistance on the warm side of the insulation layer. If required, the vapour resistance of the wall lining can be increased by the use of a vapour check plasterboard*, the use of Kingspan Kooltherm® K118 Insulated Plasterboard, which contains an integral vapour control layer*, the use of a layer of polythene sheeting*, or by the application of two coats of Gyproc Drywall Sealer.

    Fire Stops
    Current Building Regulations / Standards should be considered with regard to the requirements for, and provision of, fire stops

    Lightning Protection
    Building designers should give consideration to the requirements of BS / I.S. EN 62305: 2011 (Protection against lightning).

    Cutting
    Cutting should be carried out either by using a fine toothed saw, or by scoring with a sharp knife, snapping the board over a straight edge and then cutting the facing on the other side.
    Ensure accurate trimming to achieve close butting joints and continuity of insulation.

    Specification Clause
    Kingspan Thermawall® TW55 should be described in specifications as:
    The stud wall insulation shall be Kingspan Thermawall® TW55 ____ mm thick: comprising a high performance rigid thermoset insulation core faced on both sides with a low emissivity composite foil facing. The product shall be manufactured: with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP); in accordance with the requirements of BS 4841–1;
    under a management system certified to ISO 9001: 2008, ISO 14001: 2004, BS / I.S. OHSAS 18001: 2007 and ISO 50001: 2011; by Kingspan Insulation Limited; and installed in accordance with the instructions issued by them.

    25mm Kingspan Thermawall TW55 Board

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Get best price of 25mm Kingspan Thermawall TW55 Board?

    When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

    The total time it takes to receive your order is shown below:

    The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

    Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

    Shipping from your local warehouse is significantly faster. Some charges may apply.

    In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

    All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

    Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

    While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

    Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

    pdf brochures
    Size Chart