30mm Ravatherm XPS X 300 SB Multi-Purpose Extruded Polystyrene Board (Pack-14)
For the thermal insulation of domestic and industrial floors, basement and/or cellar perimeter walls.
Multi-purpose extruded polystyrene (XPS) board
2500mm x 600mm
21m2 (Pack - 14)
2-3 Working Days
Speak to an insulation expert:
Get in touch with us over our LIVE CHAT or 02038839057
30mm Ravatherm XPS X 300 SB Multi-Purpose Extruded Polystyrene Board
High-performance, multi-purpose extruded polystyrene (XPS) boards for the thermal insulation of domestic and industrial floors, basement and/or cellar perimeter walls.
Ravatherm XPS insulation X 300 SB thermal insulation is manufactured by an extrusion process, which results in a homogeneous, closed-cell material structure, smooth surface skin (extrusion skin) and many favourable material characteristics.
Thickness(mm): 30mm, 50mm, 75mm, 100mm, 125mm
Pack Quantity: 14
Pack Coverage: 21m2
Edge Profile: Butt Edge
Surface finish: Skin
Thermal Conductivity: 0.030 W/m.K
Thermal Resistance: 1.35 m2.K/W
Compressive stress or compressive strength: 300kPa
Fire Performance: Euroclass E
Coefficient of linear thermal expansion (typical value): 0.07 mm/(m.K)
Temperature limits: -50/+75 °C
- Excellent thermal insulation capability
- Cost efficient solution
- Simple installation
- Waterproof, negligible moisture uptake
- Environmental friendly
- High compressive strength
- Energy saving
- Resistent to high loads
- BASEMENT RETAINING WALLS
- RESIDENTIAL FLOORS
- COMMERCIAL FLOORS
- COLD STORAGE FACILITIES
30mm xps insulation Ravatherm XPS X 300 SB extruded polystyrene thermal insulation can be used in a wide range of applications. It has a number of beneficial properties thanks to its homogeneous, closed-cell material structure:
- permanently high thermal insulation level
- negligible moisture uptake
- high strength and rigidity
- dimensional stability
- resistance to rot and deterioration
- simple and quick installation with only a small amount of waste.
Ravatherm XPS X 300 SB is excellent for thermal insulation in:
- domestic floors
- industrial floors
- cold storage floors
- speciality floors
Ravatherm XPS X 300 SB thermal insulation is manufactured by an extrusion process, resulting in a homogeneous, closed-cell material structure, a smooth surface skin (extrusion skin) and many favourable material properties:
- permanently high thermal insulation performance
- water resistance
- high compressive strength
- high flexible rigidity
- high vapour diffusion resistance
STRUCTURES IN CONTACT WITH THE SOIL
To avoid creating a thermal bridge, Ravatherm insulation XPS X 300 SB boards with butt edge finishing must be laid with no gaps between the boards.
The thermal insulation can be cut easily and accurately using hand tools.
The maximum installation depth of the thermal insulation is determined by the load: the horizontal pressure must not exceed the compressive strength of the boards, taking into account the value of the permanent load.
In the case of a compressed gravel bed or thin blind concrete, Ravatherm 30mm XPS X 300 SB thermal insulation must be laid down directly using screed levelling if required. If the thermal insulation is installed above the waterproofing membrane, it serves as a mechanical protective layer.
In the case of domestic floors and floor heating, the heavy-duty heat-insulating layer provides a firm base for the base concrete (screed) and underfloor heating. Heating pipes can be fastened directly to the thermal insulation.
- CE 13164
If you have questions about 30mm Ravatherm XPS X 300 SB Multi-Purpose Extruded Polystyrene Board please call us on 02038839057! You can also text us back in our live chat.
Please find all datasheets in PDF & BROCHURES section.
Bee with us!!
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!
All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.
Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.
While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.
Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.