30mm Thick 27mm Bore Rockwool Rocklap HV Pipe Insulation Sections
The sections have been designed to provide acoustic and thermal insulation to heating, ventilation and air conditioning pipework, from temperatures of 0˚C to 250˚C.
Pre-formed sections of stone wool insulation
1000mm - 30mm Thick 27mm Bore
2-3 Working Days
Speak to an insulation expert:
Get in touch with us over our LIVE CHAT or 02038839057
30mm Thick 27mm Bore Rockwool Rocklap HV Pipe Insulation Sections
RockLap H&V Pipe Sections
ROCKWOOL RockLap H&V Sections are pre-formed sections of stone wool insulation, manufactured pre-slit for ease of application and have a layer of factory applied foil facing and a self-adhesive lap. The self-adhesive lap allows the sections to be snapped onto the pipework, then backing tape used to completely seal the joint.
The sections have been designed to provide acoustic and thermal insulation to heating, ventilation and air conditioning pipework, from temperatures of 0˚C to 250˚C. In addition to insulating to save energy and minimise heat loss, insulation is required to services and equipment for other specific criteria such as Frost Protection, Condensation Control, Personnel Protection and Acoustic Control.
RockLap H&V Pipe Sections are strong lengths of pre-formed insulation with a one piece, factory applied foil facing with integral self-adhesive lap. The integral lap ensures fast and easy installation: just snap the sections onto the pipe, peel off the backing tape and smooth down for a completely sealed joint.
Thickness (mm): 30mm
Outer diameter (mm): 27mm
Length (mm): 1000
Service Temperature: up to 250°C
Compliance: BS EN 14303, ISO 14001
Reaction to fire: Fire Properties A2-s1,d0
Thermal conductivity: 0.033 - 0.034 W/mK
RockLap H&V Sections are used for heating and ventilation pipes in a range of settings, through buildings, plants and other structures. The sections have been proven to deliver high performance thermal insulation in a range of settings with varying climates and degrees of exposure for over 60 years.
-Fast and simple to install with the snap system, reducing cost and the amount of time on site.
-The requirement for taping is significantly reduced due to the security of the snap system, taping is simply used as a seal.
-ROCKWOOL RockLap H&V Sections have limited combustibility; the surface finish is also compliant with Class 0.
-The sections are resilient and high performing provided in a one-piece, with reinforced foil and integral lap.
• Resilient, high performance barrier provided by onepiece, reinforced foil with integral lap
• Fast and simple installation reduces costs and time on site Installation may be carried out in winter conditions
• Tape requirement reduced
• Limited combustible product with surface finish also complying to Class 0
Sizes & packaging
RockLap H&V Pipe Insulation Sections are supplied in 1 metre lengths and are available to suit a wide variety of pipe outer diameters (O.D.) from 17mm to 406mm. The sections are also available in an array of thicknesses to suit the level of insulation required (20mm to 100mm).
For information on specifying the correct thickness of material, please refer to our brochure entitled:
• The thickness of ROCKWOOL Insulation in accordance with BS5422:2009.
For detailed specification clauses, please refer to our:
• HVAC Specification Detail Guide.
Other product properties
Water resistance: RockLap H&V Pipe Sections are water repellent. However, when used or stored in the open, the insulation should be protected with a waterproof covering.
When used to insulate cold pipes, the joints should be sealed with foil tape to prevent condensation.
Service temperature: RockLap H&V Pipe Sections are used to insulate pipes operating at temperatures in the range 0 to 250°C. The sections are used to insulate against frost damage. For hot pipes, the limiting temperature of the outer foil face is 80°C to maintain facing
pH neutrality: ROCKWOOL insulation is chemically compatible with all types of pipes, equipment and fittings. (Guidance is given in BS 5970 regarding the treatment of austenitic stainless-steel pipework and fittings). Stone wool insulation is chemically inert. A typical aqueous extract of ROCKWOOL insulation is neutral or slightly alkaline (pH 7 to 9.5).
Durability: ROCKWOOL stone wool insulation products have been proven in service for over 60 years, in a wide range of climates and degrees of exposure. ROCKWOOL insulation will generally perform effectively for the lifetime of the building, plant or structure.
If you have questions about 30mm Thick 27mm Bore Rockwool Rocklap HV Pipe Insulation Sections please call us on 02038839057! You can also text us back in our live chat.
Please find all datasheets in PDF & BROCHURES section.
Bee with us!! 02038839057
Insulation, insulation uk, insulation shop, insulationbee uk, insulationbee shop, insulationbee boards, insulationbee uk
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!
All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.
Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.
While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.
Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.