EcoTherm Eco-liner 2in1 PIR insulated board - 37.5mm

EcoTherm Eco-liner 2in1 PIR insulated board - 37.5mm

  • Documentation
  • 0 reviews
    £49.39 EX VAT £59.27 INC VAT

    Additional Info

    Product Code:
    • Application:
      Ideal for Pitched roofs, cold flat roofs, walls, room-in-the-roof applications and Both new build and renovations
    • Type:
      Fibre free rigid polyisocyanurate (PIR)
    • Product Size:
      2400mm x 1200mm
    • Thickness:
    • Pack Coverage:
    • Estimated Delivery:
      2-3 Working Days

    Product Description

    EcoTherm Eco-liner 2in1 PIR insulated board - 37.5mm

    EcoTherm Eco-liner 2 in 1 insulated dry lining board for fix and dab applications

    Eco Therm Eco-liner is a fibre free rigid polyisocyanurate (PIR) insulation core bonded to 12.5mm tapered edge gypsum plasterboard using proprietary gypsum adhesive. The 2 in 1 board insulates and dry lines walls in one application.

    Insulation thickness: 25mm
    Total thickness: 37.5mm (25mm PIR+ 12.5 mm plasterboard)
    Available thicknesses: 37.5mm,42.5mm,52.5mm,62.5mm,72.5mm,82.5mm,92.5mm
    Dimensions: 1200 x 2400 mm (2.88m2)
    Total weight/per board: 27.0 kg
    Thermal Resistance: 1.2 m2K/W
    Thermal conductivity: Insulation: 0.022 W/mK Plasterboard: 0.19 W/mK
    Typical u-value (Mechanically Fixed to Timber Battens): 0.55 W/m2K
    Typical u-value (Dot & Dab Application): 0.57 W/m2K
    Facing: Bilaminate foil/kraft paper facing on the outer, and bonded to a 12.5mm tapered edge gypsum plasterboard on the inner facing
    Core: Fibre free rigid polyisocyanurate (PIR) insulant manufactured with a blowing agent that is CFC/HCFC free and has zero Ozone Depletion Potential (ODP) with a low Global Warming Potential (GWP)
    Compressive strength: 140 kPa when tested at 10% compression to BS EN 826: 2013
    Green Guide Rating: A+
    Fire performance: Class 0

    Room side insulation responds quickly to heating systems and applications include upgrading the thermal performance of existing walls, providing a cost effective means of reducing CO2 emissions and for compliance
    with Building Regulations /Standards. Ideal for:

    Pitched roofs/Cold flat roofs
    Room-in-the-roof applications
    Both new build and renovations

    EcoTherm in pitched roofs
    Minimise potential condensation problems
    Ideal for room in the roof - insulate the roof, cheeks of dormers and ceilings
    Roofs insulated at rafter level create a warm roof; no pipe or tank lagging is required
    Insulate over, between or below rafters
    Cut the rigid boards quickly and easily to fit between rafters

    EcoTherm in Wall insulation
    Cavity walls
    Internal walls
    Timber frame walls

    The product is stable, rot proof and durable and when correctly installed has an indefinite life. Durability depends on the method of application, the supporting structure and conditions of use. It should not be used to isolate dampness nor be used in continuously damp/ humid conditions. The fibre free insulation core and facings resist attack from mould and microbial growth and do not provide any food value for vermin.

    PIR insulation resists attack from alkalis, dilute acids, mineral oil and petrol. The fibre free insulation core is not resistant to ketonic solvents.
    Damaged boards should not be used.

    The thermal conductivity (lambda/λ - value) of the insulation is 0.022W/mK. The 12.5mm gypsum plasterboard element has a thermal conductivity
    (lambda/λ - value) of 0.19W/mK. The thermal resistances of the range of shown in Table 1. EcoTherm insulation lambda and thermal resistance values stated in this datasheet are in accordance with BS EN 13165: 2012 + A2: 2016 (Thermal insulation products for buildings. Factory made rigid
    polyurethane foam (PU) products. Specification).

    Eco-Liner has an integral vapour control layer to minimise the risk of interstitial condensation. If increased water vapour resistance is
    required, apply 2 coats of a proprietary sealer in drylined/taped/ jointed systems. The insulation facing has a high water vapour resistance and will,
    therefore, provide a significant resistance to water vapour transmission.

    Do not drop boards
    Wear eye protection
    To cut use a fine tooth saw
    Damaged boards should not be used

    Cutting plasterboard with power tools and sanding generates dust, so should be kept to a minimum. Ideally all operations which produce dust should be carried out in well ventilated conditions; where possible a dust mask selected in accordance with BS EN 149 should be worn.
    The general approach to control of occupational exposure to airborne dust is outlined in Health and Safety. Ensure accurate trimming to achieve close butt joints and continuity of insulation. For good drywall practice follow BS 8212:1995 Code of Practice for dry lining and partitioning using gypsum plasterboard and BS 8000-Part 8:1994 Workmanship

    Eco-Liner is covered by BBA Agrément Certificate No 14//5157.
    Standard gypsum plasterboard complies with BS EN 520:2004+A1:2009 Gypsum plasterboards. Definitions, requirements and test methods.
    Manufacturing process based upon BS EN 13950: 2005. EcoTherm PIR Insulation is manufactured under an ISO 9001 Quality
    Management System (LPCB certificate 388 – 7QMS), ISO 14001 Environmental Management System (LPCB certificate - 388 – 7EMS) and
    BS OHSAS 18001 Occupational Health and Safety Management System (LPCB certificate 388 – 7HS). All certificates are available for download from

    For further advice, please contact Eco Therm:
    Tel: ( 01268 591155 )

    EcoTherm Eco-liner 2in1 PIR insulated board - 37.5mm

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Get best price of EcoTherm Eco-liner 2in1 PIR insulated board - 37.5mm?

    When you order from, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

    The total time it takes to receive your order is shown below:

    The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

    Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

    Shipping from your local warehouse is significantly faster. Some charges may apply.

    In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

    All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

    Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

    While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

    Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

    pdf brochures
    Size Chart