Gyproc thermaLine PIR insulated plasterboard - 38mm

Gyproc thermaLine PIR insulated plasterboard - 38mm

  • Documentation
  • 0 reviews
    £59.73 EX VAT £71.68 INC VAT

    Additional Info

    British Gypsum
    Product Code:
    • Application:
      Designed to be used in both refurbishment and new build for walls, ceiling, room in the roof and window
    • Type:
      PIR Insulated Plasterboard
    • Product Size:
      2400mm x 1200mm
    • Thickness:
    • Pack Coverage:
    • Estimated Delivery:
      3-5 Working Days

    Product Description

    Gyproc thermaLine PIR insulated plasterboard - 38mm

    Gyproc ThermaLine PIR
    12.5mm Gyproc WallBoard bonded to CFC and HCFC-free meaning zero ODP (Ozone Depletion Potential), high performance polyisocyanurate foam insulant with two integral vapour control layers to reduce the risk of condensation. Designed to be used in both refurbishment and new build for walls, ceiling, room in the roof and window reveals where a high level of cost effective thermal insulation is required to reduce heat loss from buildings as part of our British Gypsum BBA approved systems.Gypsum plasterboard with integral vapour control layers for an advanced level of thermal insulation.

    Thickness: 38mm
    All Thickness: 38,53,63,78,93mm
    Length: 2400mm
    Width: 1200mm
    Weight: 9.3kg/m2
    Coverage: 2.88m2
    Thermal Conductivity: Gyproc WallBoard 0.19W/mK
    Thermal Conductivity: Polyisocyanurate foam 0.022W/mK
    Thermal Resistance: 1.15m2K/W

    Vapour resistance
    The breakdown of the components are as follows:
    -Foil / paper (outside) – 4000(MNs/g)
    -Polyisocyanurate foam 300 dependent on thickness
    -Foil / paper (inside) – 4000(MNs/g)
    -Plasterboard 50 0.625 (MNs/g)

    New Gyproc ThermaLine pir
    The facts:
    A cost effective superior performance board
    Compatible with British Gypsum systems and covered by our SpecSure® guarantee
    British Gypsum systems  allow compatibility with  all backgrounds and  framing solutions

    Effect of temperature and moisture
    Gyproc ThermaLine pir is unsuitable for use in areas  subject to continuously damp or humid conditions,  i.e. above 70% RH, and must not be used to isolate dampness. Gyproc ThermaLine pir is not suitable for  use in temperatures above 49°C but can be subjected  to freezing conditions without risk of damage.

    Effect of condensation
    The thermal insulation and ventilation requirements of the Building Regulations aim to reduce the risk of condensation and mould growth in new buildings.  However, designers should take care to eliminate all possibility of problems caused by condensation, particularly in refurbishment projects. For further information, please refer to The White Book, available  to download from

    Gyproc ThermaLine pir consists of a 12.5mm Gyproc WallBoard produced to BS EN 520 bonded to a rigid polyisocyanurate foam (PIR) with a multi-layer kraft/aluminium facer on both sides of the insulation board that is produced in accordance with BS EN 13165. The Gyproc WallBoard and PIR insulation are factory bonded together and conforms to BS EN 13950.
    Gyproc ThermaLine pir is only available in a plasterboard tapered edge finish (T/E) and in thicknesses of 38,53,63, 78 & 93mm.
    Gyproc ThermaLine pir is one of the products within our plasterboard range that is certified to BES 6001 achieving a rating of ‘Excellent’.

    Gyproc thermaLine PIR insulated plasterboard - 38mm

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Get best price of Gyproc thermaLine PIR insulated plasterboard - 38mm?

    When you order from, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

    The total time it takes to receive your order is shown below:

    The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

    Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

    Shipping from your local warehouse is significantly faster. Some charges may apply.

    In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

    All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

    Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

    While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

    Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

    pdf brochures
    Size Chart