40mm Celotex GD5000 PIR Insulation Board Bonded To 12.5mm Plasterboard (pack-22)

40mm Celotex GD5000 PIR Insulation Board Bonded To 12.5mm Plasterboard (pack-22)

  • Documentation
  • 0 reviews

    Additional Info

    Product Code:
    • Application:
      Designed for providing better U-values and thinner solutions in adhesively bonded solid wall upgrades and other dry-lining applications. These include, timber frame constructions and the underneath layer of between and under build-ups in pitched and flat roofs.
    • Type:
      PIR Insulation Board bonded Plasterboard
    • Product Size:
      2400mm x 1200mm
    • Thickness:
    • Pack Coverage:
    • Estimated Delivery:
      3-5 Working Days
    • Speak to an insulation expert:
      Get in touch with us over our LIVE CHAT or 02038839057

    Product Description

    40mm Celotex GD5000 PIR Insulation Board Bonded To 12.5mm Plasterboard (pack-22)

    40 Bags EWI-221 EPS Winter Insulation Adhesive - 25kg

    EWI-221 EPS Winter Insulation Adhesive - 25kg can be used both within the reinforcement layer and for fixing EPS insulation boards to substrates much like EWI-220. The major difference is that this winter adhesive can be used even when the external temperature is very low – in fact, it allows the external wall insulation systems to be installed down to temperatures as low as 0 degrees.


    The Winter Adhesive comes as 25kg dry mix. 6.3 litres of water need to be mixed with the winter adhesive to form the adhesive mortar. Once set firm and hard, it has excellent water and frost resistance and unsurpassed adhesive properties in colder weather. We suggest using a large bucket and adding the water prior to the winter adhesive. Once the winter adhesive has been added to the water, it needs to be mixed using a paddle mix until an even consistency mortar is produced. Once the winter adhesive has been mixed, leave the bucket for 5-10 minutes and then remix using the paddle mix. The adhesive is then ready for use.

    EWI-221 EPS Winter Insulation Adhesive - 25kg is the ideal product for installing polystyrene insulation systems during cold weather. With its excellent frost-proofing capabilities, Winter Adhesive can even be used in temperatures down to 0°C.

    Key Facts



    -High Grip

    -Contains microfibres for increased flexibility


    -Composition: Portland cement, mineral fillers, polymers, refining agents and microfibres.

    -Bulk density (dry mixture): About 1.45 g/cm3

    -Adhesion to concrete (air-dry): ≥ 0.3 MPa

    -Adhesion to polystyrene: ≥ 0.08 MPa(rupture in thermal insulation material)

    -Soluble chromium (VI) concentration: ≤ 0.0002%

    -Substrate primer: EWI-301

    -Application and setting temperature (air, substrate, materials): from 0°C to +25°C

    -Water mix proportions: approx. 6.3 l of water per 25 kg of dry mix

    -Time to use after mixing with water: about 2 hours

    -Min/max thickness: 4mm-10mm

    EWI-221 EPS Winter Insulation Adhesive - 25kg


    The presence of microfibres in the winter adhesive means that it will still set in a timely fashion even at low temperatures. This means continuous workflow when conditions would normally prevent it. EWI-221 Winter Adhesive can be used for two purposes:

    An adhesive used to create the reinforcement basecoat layer.

    An adhesive used to fix expanded polystyrene (EPS) to a substrate.

    EWI-221 EPS Winter Insulation Adhesive - 25kg is prepared in the same way regardless of whether it is being used as a basecoat adhesive or to fix the EPS insulation boards to the substrate. EWI-221 should not be used for fixing extruded polystyrene (XPS) and thermal insulation on bituminous substrates.

    Application Conditions

    Substrate primer: EWI- 301 or EWI-310 if a key is required

    Application temperature (air, substrate, materials): from +0°C to +25°C

    Water mix proportions: approx. 6.3 l of water per 25 kg of dry mix

    Time of usability after mixing with water: approx. 2 hours (temp. +20°C)

    Quantity to be used: approx. 4-5 kg/m2

    Storage Conditions 

    Comes in powder form in a 25kg paper bag.

    Store in a cool, dry place. Avoid ingress of water. Shelf life: up to 12 months from the date of manufacture.

    If you have questions about EWI-221 EPS Winter Insulation Adhesive - 25kg please call us on 02038839057! You can also text us back in our live chat.

    Please find all datasheets in PDF & BROCHURES section.

    Bee with us!! 02038839057


    InsulationBee Shop

    40mm Celotex GD5000 PIR Insulation Board Bonded To 12.5mm Plasterboard (pack-22)

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Get best price of 40mm Celotex GD5000 PIR Insulation Board Bonded To 12.5mm Plasterboard (pack-22)?

    When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

    The total time it takes to receive your order is shown below:

    The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

    Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

    Shipping from your local warehouse is significantly faster. Some charges may apply.

    In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

    All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

    Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

    While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

    Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

    pdf brochures
    Size Chart