50mm Ravatherm XPS X 200 SB Extruded Polystyrene Board For Floors And Walls (Pack-8)
50mm Ravatherm XPS X 200 SB Extruded Polystyrene Board For floors And Walls
High-performance, multi-purpose extruded polystyrene XPS boards for the thermal insulation of domestic and industrial floors, basement and/or cellar perimeter walls.
Ravatherm XPS X 200 SB thermal insulation is manufactured by an extrusion process, which results in a homogeneous, closed-cell material structure, smooth surface skin (extrusion skin) and many favourable material characteristics.
Product Details
Thickness(mm): 50mm, 75mm, 100mm, 125mm
Length mm: 2500
Width mm: 600
Board/Pack: 8
M2/pack: 12
Compressive strength: 200 KPA
Water vapour diffusion resistance factor μ: 100
Thermal Conductivity: 0.031 W/m.K
Thermal Resistance: 1.65 m2.K/W
Fire Performance: Euroclass E
Edge Profile: Butt Edge
Surface finish: Skin
General
Ravatherm XPS X 200 SB 50mm extruded polystyrene thermal insulation can be used in a wide range of applications. It has a number of beneficial properties thanks to its homogeneous, closed-cell material structure
- Permanently high thermal insulation level
- Negligible moisture uptake
- High strength and rigidity
- Dimensional stability
- Resistance to rot and deterioration
- Simple and quick installation with only a small amount of waste.
Ravatherm XPS X 200 SB is excellent for thermal insulation in:
- Domestic floors
- Industrial floors
- Cold storage floors
- Speciality floors
Benefits
Ravatherm XPS X 200 SB 50mm thermal insulation is manufactured by an extrusion process, resulting in a homogeneous, closed-cell material structure, a smooth surface skin (extrusion skin) and many favourable material properties:
- Permanently high thermal insulation performance
- Water resistance
- High compressive strength
- High flexible rigidity
- High vapour diffusion resistance
Features
- Excellent thermal insulation capability
- Waterproof, negligible moisture uptake
- Energy saving
- Cost efficient solution
- Environmental friendly
- Resistant to high loads
- Simple installation
- High compressive strength
Application Fields
- Basement Retaining Walls
- Commercial Floors
- Basement Floors
- Cold Storage Facilities
- Residential Floors
- Swimming Pools
Technical
Structure in contact with the soil
To avoid creating a thermal bridge, Ravatherm XPS X 200 SB boards with butt edge finishing must be laid with no gaps between the boards.
The thermal insulation can be cut easily and accurately using hand tools.
The maximum installation depth of the thermal insulation is determined by the load: the horizontal pressure must not exceed the compressive strength of the boards, taking into account the value of the permanent load.
Floors
In the case of a compressed gravel bed or thin blind concrete, Ravatherm XPS X 200 SB thermal insulation must be laid down directly using screed levelling if required. If the thermal insulation is installed above the waterproofing membrane, it serves as a mechanical protective layer.
In the case of domestic floors and floor heating, the heavy-duty heat-insulating layer provides a firm base for the base concrete (screed) and underfloor heating. Heating pipes can be fastened directly to the thermal insulation.
If you have questions about 50mm Ravatherm XPS X 200 SB Extruded Polystyrene Board For floors And Walls please call us on 02038839057! You can also text us back in our live chat.
Please find all datasheets in PDF & BROCHURES section.
Bee with us!!
Sales@insulationbee.co.uk
InsulationBee Shop
50mm Ravatherm XPS X 200 SB Extruded Polystyrene Board For Floors And Walls (Pack-8)