60mm Kingspan Thermafloor TF70
Kingspan Thermafloor TF70
High performance floor insulation Kingspan Thermafloor TF70 is a high performance insulation with a fibre-free rigid thermoset polyisocyanurate (PIR) core.
It used to insulate solid concrete and suspended timber ground floors, and has a thermal conductivity of 0.022 W/m·K.

Thickness: 60mm
All thickness : 20mm,25mm,30mm,40mm,50mm,60mm,70mm,75mm,80mm,
90mm,100mm,120mm,140mm,150mm
Length: 2400mm
Width: 1200mm
Sheet coverage: 2.88m2
Thermal conductivity: 0.022 W/mK
Compressive strength: 140 kPa (at 10% compression)
Thermal resistance: 2.70m²K/W
Facings: Low emissivity composite foil
Core: High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)
Key Facts:
High performance rigid thermoset insulation – thermal conductivity 0.022 W/m.K
Can reduce the cost of related items – soil removal, service connections
Unaffected by air infiltration
Resistant to the passage of water vapour
Easy to handle and install
Ideal for new build and refurbishment
Non–deleterious material
Manufactured with a blowing agent that has zero ODP and low GWP
Typical Constructions:
Beam and Dense Block Ground Floors
Between Battens Under a Timber Floor
Suspended Timber Ground Floors
Solid Concrete Ground Based Floors
Timber Floor on Battens
Timber Floating Floor
Underfloor Heating Systems
Cutting :
Cutting should be carried out either by using a fine toothed saw, or by scoring with a sharp knife, snapping the
board over a straight edge and then cutting the facing on the other side.
Daily Working Practice:
At the completion of each day’s work, or whenever work is interrupted for extended periods of time, board edges and joints should be protected from inclement weather.
The Core:
The core of Kingspan Thermafloor® TF70 is manufactured with Nilflam® technology, a high performance fibre–free
rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP).
Durability:
If correctly installed, Kingspan Thermafloor® TF70 can have an indefinite life. Its durability depends on the supporting structure and the conditions of its use.
Fire Performance:
Kingspan Thermafloor® TF70 is Class 1, as defined by BS 476–7: 1997 (Fire tests on building materials and structures.
Method of test to determine the classification of the surface spread of flame of products).
Water Vapour Resistance:
Adjusted for the effect of board joints, the product achieves a resistance far greater than 100 MN.s/g, when tested in accordance with BS / I.S. EN 12086: 2013 (Thermal insulating products for building applications. Determination of water vapour transmission properties).
For further advice, please call KIngspan:
Tel. 01544 388 601
60mm Kingspan Thermafloor TF70