229889728003396
Kingspan kooltherm K5 external wall board - 90mm (6/pack)

Kingspan kooltherm K5 external wall board - 90mm (6/pack)

  • Documentation
  • 0 reviews

    Additional Info

    Brand:
    Kingspan
    Product Code:
    C-533
    • Application:
      External insulation for masonry walls, brick cavity, solid brick wall, Cavity block wall, Cavity brick wall.
    • Type:
      External Wall Board
    • Product Size:
      1200mm x 400mm
    • Thickness:
      90mm
    • Pack Coverage:
      2.88m2
    • Estimated Delivery:
      2-3 Working Days

    Product Description

    Kingspan kooltherm K5 external wall board - 90mm (6/pack)

    90mm Kingspan kooltherm K5


    Kingspan Kooltherm K5 External Wall Board is a premium performance external insulation for masonry walls.
    A premium performance insulation with a fibre-free rigid thermoset phenolic core, it is suitable for use behind traditional and lightweight polymer modified renders and dry cladding systems.
    Depending on the insulation thickness, Kingspan Kooltherm K5 External Wall Board provides a thermal conductivity between 0.020 W/m·K and 0.023 W/m·K.


    Thickness: 90mm
    All thicknesses available: 20mm,30mm,40mm,50mm,60mm,70mm,80mm,90mm,100mm
    Lenght: 
    1200mm
    Width: 
    400mm
    Pack coverage:
    2.88m2
    Pack quantity:
    6 sheets
    Weight/m2:
    3.15kg
    Weight:
    9.08kg
    Thermal conductivity :
    0.021 W/m·K
    Fire rating:
    class 0
    Facings:
    Glass tissue
    Green Guide Rating:
    Kingspan Kooltherm K5 External Wall Board achieves a Green Guide Rating of A+.                                                                                                Core: Premium performance rigid thermoset phenolic insulation manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)



    Key Facts:
    Premium performance rigid thermoset insulation – thermal conductivities as low as 0.020 W/m.K
    Suitable for use behind traditional and lightweight polymer modified renders
    Unaffected by air infiltration
    Resistant to the passage of water vapour
    Easy to handle and install
    Ideal for new build and refurbishment
    Non−deleterious material
    Manufactured with a blowing
    agent that has zero ODP and low GWP


    Typical Construction:
    Where insulating externally or sheathing a frame construction, there are some simple design considerations that can be adopted to help reduce heat losses.
    The reveal linear thermal bridge can be avoided either by positioning the window frame so that its outer face is flush with the outer surface of the masonry wall, and overlapping the window frame with the external wall insulation. Or, if this is not possible, the linear thermal bridge can be reduced by insulating the reveal at jambs, head and sill. The key factor is the thermal resistance (R–value) of this insulation layer.
    Reveals should be designed to accommodate the 20 mm of Kingspan Kooltherm® K5 External Wall Board required to achieve an R–value of 0.6 m2.K/W, and the depth of the cladding system (see Figure 7).
    Heat loss through reveal junctions can also be reduced by internally accommodating 32.5 mm (min.) of Kingspan Kooltherm® K118 Insulated Plasterboard around the openings
    Where existing windows or doors are not replaced as part of renovation works, design and detailing should consider the potential for future replacement works.


    At ground floor junctions where Kingspan Kooltherm® K5 External Wall Board is used on an existing substrate, good practice is to extend the insulation below the starter rail as an insulated plinth to ground level (for example using Kingspan Purlcrete® chevron). Best practice would be to excavate and extend the external insulation below ground level by at least 300 mm below finished floor level to increase the heat flow path and reduce junction losses. A starter rail / track formed from a low conductivity material can also help to reduce losses through this junction.
    For a new build construction, where Kingspan Kooltherm® K5 External Wall Board is used to sheath a frame construction at the edge of ground floors, the distance between the top surface of the floor insulation or perimeter insulation upstand, and the bottom of the wall insulation must be a minimum of 150 / 225* mm for a concrete floor and 200 mm for a suspended timber floor. The further appropriate wall insulation extends past the floor insulation, the better the thermal performance of the junction between the wall and the floor will be.
    * 150 mm applies to the UK and 225 mm to the Republic of Ireland

    For further advice on details to reduce linear thermal bridging please contact the Kingspan Insulation Technical Service Department.
    Tel: ( +44 1544 388601)

    Kingspan kooltherm K5 external wall board - 90mm (6/pack)

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Get best price of Kingspan kooltherm K5 external wall board - 90mm (6/pack)?

    When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

    The total time it takes to receive your order is shown below:

    The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

    Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

    Shipping from your local warehouse is significantly faster. Some charges may apply.

    In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

    All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

    Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

    While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

    Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

    pdf brochures
    Size Chart