Atlas Plus Gipsar Gypsum Plaster Finishing Coat 20kg
Is for internal application to concrete, aerated concrete, cement, cement-lime and gypsum plasters.
Gypsum Plaster Finishing Coat
2-3 Working Days
Speak to an insulation expert:
Get in touch with us over our LIVE CHAT or 02038839057
Atlas Plus Gipsar Gypsum Plaster Finishing Coat 20kg
Atlas PLUS GIPSAR 20Kg Finishing Plaster is for internal application to concrete, aerated concrete, cement, cement-lime and gypsum plasters. Also ideal for filing small gaps in walls and ceiling as well as surface repairs before the gypsum top finishes are applied in paint and wallpapers.
PLUS GIPSAR is manufactured as a dry mix of synthetic gypsum, mineral fillers, modifying additives and the adjusters of setting time.
- Bulk Density (of dry mix): CA. 1.00 KG/DM³
- Mixing proportions water / dry mix: 7.0 ÷ 9.0 l / 20 kg
- Maximum single coat thickness: 3 mm
- Maximum finishing coat thickness: 5 mm
- Mixing temperature and substrate and ambient temperature during work: from +5°C to +25°C relative humidity up to 70%
- Maturing time min. 5 minutes
- Pot life: ca. 1 hour
- Foil bags: 20 kg.
- Pallet: 1080 kg in 20 kg bags.
- Consumption: The average consumption is approx. 0.8 kg of mix/ 1 m² / 1 mm of coat thickness.
Atlas GIPSAR PLUS conforms to PN-EN 13279-1 standard. EC Declaration of Performance No. 195/CPR.
- CE: PN-EN 13279-1:2009 (EN 13279-1:2008)
- Finishing gypsum plaster C7/50/2: For application of finishing coats indoors, onto walls and ceilings
- Reaction to fire - class: A1
- Airborne sound insulation: NPD
- Thermal resistance: NPD
- Reinforced with polymers - maximum single coat thickness 3 mm - for manual and spray application - for manual and mechanical sanding
- Max. single layer thickness - 3 mm
- Max. total thickness - 5 mm
- Consumption: ca. 0.8 kg / 1 m² / 1 mm layer thickness.
For application of gypsum finishing coats on walls and ceilings.
Fills small gaps in walls and ceilings – can be used for surface repairs before gypsum finish application.
Types of substrates – concrete, aerated concrete; gypsum, cement, cement-lime, gypsum plasters and plasterboards.
Types of finishing coats – painting coats and wallpapers.
The product classified according to the standard as C7 gypsum finishing plaster.
Increased firmness – the strength of intercrystalline bonds in gypsum was increased by the addition of modified polymers - redispersible powder resins - therefore GIPSAR PLUS forms an uniform, firm and smooth surface for painting and wall-papering.
Possibility of machine and manual grinding – after drying the mass can be processed with professional grinders with appropriate sanding discs. Due to the product increased firmness after setting, there is no risk of irregular machine grinding. The finishing coat can also be processed manually, where slight irregularities can be removed by hand with appropriate sand paper or polishing mesh.
Forms strong and stable substrate – the surface can be easily grinded and the resulting dust does not block the mesh or paper.
Possibility of spray application – accelerates the coat application in comparison to traditional methods.
Very good working properties – the mass is plastic, does not form “bubbles”, roll and break during application, is easy to smooth.
Very smooth surface – aesthetic, uniform and smooth, forms excellent surface for painting or wall-papering.
Perfect coating – the addition of polymers makes the surface absorbable for paint coats which makes the finishing works easy and fast.
Resistant to cracking as the result of contraction during setting.
The substrate should be:
• stable – sufficiently rigid and sufficiently long stabilized. The assumed stabilizing time for substrates is, respectively :
−for new cement plaster made of ready-to-use Atlas plastering mortars, min. 1 week for each 1 cm of thickness,
−for walls of concrete, at least 28 days,
• even – maximum single coat thickness of GIPSAR PLUS is 3 mm, maximum finishing coat thickness is 5 mm,
• cleaned – from layers that can impair the mass adhesion, particularly dust, dirt, lime, grease, wax, residues of oil and emulsion paints. If the substrate is covered with biological corrosion, use ATLAS MYKOS to remove it,
−with ATLAS UNI-GRUNT emulsion – in case of excessive absorbability of the surface (gypsum plasters and prefabricated gypsum units do not require priming).
−with ATLAS GRUNTO-PLAST mass – when the substrate is of low absorbability or is coated with layers limiting the adhesion.
Moreover, all steel elements which may come in contact with the surface finishing coat must be protected against corrosion.
Pour the material from the bag into a container with water (see Technical Data for proportions), depending on the intended method of the finish application (the mass for machine application should contain the maximum recommended volume of water). Leave the mix for 5 minutes so the gypsum automatically soaks with water. Stir the mix manually or mechanically (using a mixer with a drill for gypsum) until homogenous and free of lumps. The ready to use mix must be used up within approx. 1 hour.
Finish coat application
Apply the mix manually or mechanically. While applying manually, use smooth stainless steel float and successively smooth the surface. Apply the mass onto walls in strips, starting from the floor towards the ceiling, moving the float upwards. In case of ceilings, apply the mass in strips starting from the window towards the interior, moving the float towards yourself. When applying mechanically, spray the mass leading the equipment lance 1-1.5 m from the substrate, in horizontal overlapping strips. Recommended nozzle – HDA651. In case of brakes over 1 hour long, the hopper and coils must be thoroughly cleaned and rinsed with clean water. Level the finishing coat using a steel trowel immediately after spraying. In both cases, the thickness of a single layer should not exceed 3 mm.
After drying the mass can be grinded with professional grinders with appropriate sanding discs. The finishing coat can also be processed manually, where slight irregularities can be removed by hand with appropriate sand paper or polishing mesh. Any irregularities should be floated with a thin coat again (onto previously wetted substrate) and grinded.
Painting and wallpapering can start when the finishing coat dries. Acrylic paints (e.g. ATLAS ecoFARBA) or latex paints (e.g. ATLAS optiFARBA or ATLAS proFARBA) can be used. Before painting, prime the finishing coat with a primer recommended by the paint manufacturer, e.g. ATLAS BASE COAT PAINT.
If you want to buy or have any questions about Atlas Plus Gipsar Gypsum Plaster Finishing Coat please call us on 02038839057! You can also text us back in our live chat.
Please find all datasheets in PDF & BROCHURES section.
Bee with us!!
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!
All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.
Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.
While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.
Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.