British Gypsum Gypframe 70 S 50 'C' Studs - 2400mm

British Gypsum Gypframe 70 S 50 'C' Studs - 2400mm

  • Documentation
  • 0 reviews
    £4.61 EX VAT £5.53 INC VAT

    Additional Info

    British Gypsum
    Product Code:
    • Application:
      The Gypframe ‘C’ Stud design includes sight lines down the legs of the stud to ease board alignment and increase profile strength.
    • Type:
      Gypframe Mteal Studs
    • Product Size:
      2400mm x 70mm
    • Estimated Delivery:
      3-5 Working Days
    • Speak to an insulation expert:
      Get in touch with us over our LIVE CHAT, Whatsapp Business or 02038839057

    Product Description

    British Gypsum Gypframe 70 S 50 'C' Studs - 2400mm

    British Gypsum Gypframe 70 S 50 'C' Studs - 2400mm

    These studs are the strongest available in the Gypframe range. They allow for increased partition height, without increasing partition width, and provide improved impact resistance. Commonly used in ShaftWall, GypLyner IWL, GypWall QUIET IWL and other GypWall systems where board fixing strength is paramount. Structural apertures are also spaced along the spine of the Gypframe ‘I’ Stud, providing easy routing of services through a partition. Conforms to EN 14195.

    Gypframe ‘C’ Studs

    The Gypframe ‘C’ Stud design includes sight lines down the legs of the stud to ease board alignment and increase profile strength.
    Service apertures are also spaced along the spine of the Gypframe ‘C’ Stud, providing easy routing of services through a partition.

    Product Details

    Thickness: 0.5mm

    Width: 70mm

    Length: 2400mm

    Linear metre weight kg: 0.60

    Weight: 1.30kg

    Metal products

    The modern, engineered alternative to traditional timber and blockwork construction, Gypframe-based wall, ceiling and floor systems are quicker and easier to install, whilst meeting the highest performance requirements.

    Up to 50% lighter than equivalent timber systems, and up to 70% lighter than blockwork, Gypframe metal products are easier to transport and offer a high strength to weight ratio for guaranteed performance and long life.

    British Gypsum Gypframe components are easy to cut on site, non-flammable and won’t rot, twist or warp. They can be stored outside and installed in any weather, making it easier to schedule work.

    Buy british gypsum c studs online


    British Gypsum Gypframe profiles are cold roll formed from DX51D + Z140 NA-C, utilizing the patented UltraSTEEL™1 process.

    Cold Rolling and UltraSTEEL™ UltraSTEEL™ is a manufacturing process that alters the characteristics of plain steel, providing higher strength capacity at a lighter gauge. The process effectively hardens the steel by working it in strips with two mating rolls, which produce a dimpled surface and ribbing effect across the surface of the metal. During the process, the effective thickness of the insulation material is increased to that of the original thickness plus that of the ribbing.

    Example: Base gauge = 0.5mm : after UltraSTEEL™ process = 1.0mm

    Once the UltraSTEEL™ process has been applied, the base material is then passed through a series of contoured rollers which progressively form the steel into the required profile.

    The number of rollers in the process will vary, depending on the complexity of the profile being rolled. Service entries or tabs are pierced, either at the beginning or end of this process. The formed profiles are then cut to exact length, packed and then bundled ready for delivery.

    UltraSTEEL™ is unique to British Gypsum and the Gypframe product range. Along with an aesthetic difference, UltraSTEEL™ provides the following additional benefits over plain steel sections:

    Improved yield strength

    Improved load carrying capacity

    Improved screw retention and strip out strength

    Improved resistance to screw pull-out


    Gypframe metal studs products are produced to the European manufacturing standard EN 14195: 2005 and are manufactured under a quality system independently audited and certified as conforming to ISO 9001: 2008. The EN 14195: 2005 standard does not cover component design or system performance. 


    Either British Gypsum Wafer Head Drywall Screws or British Gypsum Wafer Head Jack-Point Screws should be used to fit two sections of metal together - see table below:

    British Gypsum Wafer Head Drywall Screws / British Gypsum Wafer Head Jack-Point Screws

    Metal-to-metal up to 0.79mm thick             / Metal-to-metal greater than 0.80mm thick

    Stud framing up to 0.50mm thick                 Studs greater than 0.50mm thick

    Either British Gypsum Drywall Screws or British Gypsum Jack-Point Screws should be used for fixing plasterboard to metal. Screw length should be based on board thickness and reaching a minimum of 10mm penetration into a metal stud.


    How do you build a fire-rated partition where access is limited to one side only?

    Our ShaftWall system is designed for this application.

    How do you extend the length of Gypframe metal stud?

    This can be achieved by ‘splicing’ two studs together with an overlap of 600mm minimum, then fixing together using Wafer Head Drywall Screws (two to each flange). 

    If you want to buy or have any questions about British Gypsum Gypframe 70 S 50 'C' Studs please call us on 02038839057! You can also text us back in our live chat.

    Please find all datasheets in PDF & BROCHURES section.

    Bee with us!!

    InsulationBee Shop

    British Gypsum Gypframe 70 S 50 'C' Studs - 2400mm

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Get best price of British Gypsum Gypframe 70 S 50 'C' Studs - 2400mm?

    When you order from, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

    The total time it takes to receive your order is shown below:

    The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

    Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

    Shipping from your local warehouse is significantly faster. Some charges may apply.

    In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

    All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

    Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

    While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

    Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

    pdf brochures
    Size Chart