Gyproc Soundbloc Tapered Edge - 15mm (1200x3000)

Gyproc Soundbloc Tapered Edge - 15mm (1200x3000)

  • Documentation
  • 0 reviews
    £25.48 EX VAT £30.58 INC VAT

    Additional Info

    Brand:
    British Gypsum
    Product Code:
    C-446
    • Application:
      This product is perfect for any room or building that requires Acoustic insulation such as; cinemas, offices or domestic use and comes in a Tapered edge finish.
    • Type:
      Gypsum plasterboard with a higher density core
    • Product Size:
      3000mmx1200mm
    • Thickness:
      15mm
    • Pack Coverage:
      3.60m2
    • Estimated Delivery:
      2-3 Working Days

    Product Description

    Gyproc Soundbloc Tapered Edge - 15mm (1200x3000)

    Gyproc Soundbloc Tapered Edge - 15mm (1200x3000)

    Gyproc SoundBloc plasterboard with a high density core for enhanced sound insulation performance is designed for use in British Gypsum wall and partition systems where greater levels of sound insulation are required.

    Product description: Gypsum plasterboard with a higher density core. Gyproc SoundBloc consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners. Gyproc SoundBloc is a plasterboard that is suitable for drylining internal surfaces.
    This plasterboard is one of the products within our plasterboard range that is certified to BES 6001 achieving a rating of ‘Very Good’.

    Fire protection: Plasterboard linings provide good fire protection owing to the unique behaviour of the non-combustible gypsum core when subjected to high temperatures. For the purposes of the national Building Regulations, plasterboard is designated a ’material of limited combustibility’ (Approved Document B). The surfaces of Gyproc SoundBloc are designated Class 0 (for the purposes of national Building Regulations). Please refer to the table below.

    Gyproc SoundBloc

    Thickness: 15mm
    Avaiable Sizes: 1200x2400,1200x2700,1200x3000mm
    Length: 3000mm
    Width: 1200mm
    Weight: 52.01kg
    Edge Type: Tapered Edge
    Thermal Resistance: 0.06 m²K/W
    Thermal conductivity: 0.25W/mK
    Fire Class: Class 1 (both sides)

    Density: 940kg/m3

    Key facts:

    -Pale blue face paper
    -Brown reverse side paper
    -Available in tapered edge only
    -Complies with EN 520 – Type D
    -Thermal Conductivity 0.25W/mK
    -This product is certified to BES 6001 achieving a rating of 'Very Good'

    Fire protection
    Plasterboard linings provide good fire protection owing to the unique behaviour of the non-combustible gypsum core when subjected to high temperatures. For the purposes of the national Building Regulations, plasterboard is designated a ’material of limited combustibility’ (Approved Document B). The surfaces of Gyproc SoundBloc are designated Class 0 (for the purposes of national Building Regulations). Please refer to the table below.

    Fire resistance
    Please refer to the appropriate White Book product or systems section for information on the fire resistance of building elements lined with Gyproc SoundBloc.

    Effect of condensation
    The thermal insulation and ventilation requirements of national Building Regulations aim to reduce the risk of condensation and mould growth in new buildings. However, designers should take care to eliminate all possibility of problems caused by condensation, particularly in refurbishment projects.

    Board colour : Blue face paper / Brown reverse side paper

    Effect of temperature
    Gyproc SoundBloc is unsuitable for use in areas subject to continuously damp or humid conditions and must not be used to isolate dampness. Plasterboards are not suitable for use in temperatures above 49°C, but can be subjected to freezing conditions without risk of damage.

    Application and installation

    General
    It is important to observe appropriate health and safety legislation when working on site i.e. personal protective clothing and equipment, etc. The following notes are intended as general guidance only. In practice, consideration must be given to design criteria requiring specific project solutions.

    Handling
    Manual off-loading of this product should be carried out with care to avoid unnecessary strain. For further information please refer to the Manual Handling section of the Site Book or Manual Handling Guide, available to download from www.british-gypsum.com.

    Fixing
    Fix boards with decorative side out to receive joint treatment or a skim plaster finish. Lightly butt boards together. Never force boards into position. Install fixings not closer than 13mm from cut edges and 10mm from bound edges. Position cut edges to internal angles whenever possible, removing paper burrs with fine sandpaper. Stagger horizontal and vertical board joints between layers by a minimum of 600mm. Locate boards to the centre line of framing where this supports board edges or ends.

    Plastering
    The face (blue) of Gyproc SoundBloc can be plastered with either Thistle Board Finish or Thistle Multi-Finish. There should be the minimum of delay between completion of the lining and the commencement of plastering.

    Product standards
    EN520: 2004, A1:2009 Gypsum Plasterboards, definitions, requirements and test methods

    Gyproc Soundbloc Tapered Edge - 15mm (1200x3000)

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Get best price of Gyproc Soundbloc Tapered Edge - 15mm (1200x3000)?

    When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

    The total time it takes to receive your order is shown below:

    The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

    Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

    Shipping from your local warehouse is significantly faster. Some charges may apply.

    In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

    All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

    Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

    While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

    Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

    pdf brochures
    Size Chart