CEKOL WG-50 Non-Shrink Self-Levelling Screed 20kg

CEKOL WG-50 Non-Shrink Self-Levelling Screed 20kg

0 reviews

Additional Info

Brand:
CEKOL
Product Code:
C-1383
  • Speak to an insulation expert:
    Get in touch with us over our LIVE CHAT or 02038839057
  • Application:
    Dry mixture of synthetic gypsum, mineral fillers and a wide range of enriching additives, modifiers, that delay setting and provide excellent adhesion to the base.
  • Type:
    Synthetic Gypsum
  • Product Size:
    20kg
  • Estimated Delivery:
    2-3 Working Days

Product Description

CEKOL WG-50 Non-Shrink Self-Levelling Screed 20kg


CEKOL WG-50 is a dry mixture of synthetic gypsum, mineral fillers and a wide range of enriching additives, modifiers, that delay setting and provide excellent adhesion to the base. Due to optimal strength parameters, easy to handle. It’s wet treatment significantly reduces the amount of dust during the work carried out.


Key Facts

- 6 H FOR PEDESTRIAN TRAFFIC

- LAYER THICKNESS: 3-50 MM

- FOR COVERING: PANELS, PARQUET FLOORS, CERAMIC TILES

- FOR TYPICAL AND HEATED SURFACES

- MANUALLY AND MECHANICALLY

Coverage: about 1.5 kg/m²/1 mm of layer thickness

Additional information: pedestrian activity after 6 hours at +18ºC and drying time approx. 1.5 mm per day

Bag Size: 20 kg


PROPERTIES

CEKOL WG-50 is used for manual or mechanical covering of primers and substrates for ceramic and stone tiles, PVC covering, textiles, panels, wooden floors etc.

• It can be applied only indoors on stabilised and dry mineral surfaces, in rooms with relative humidity up to 70%.

CEKOL WG-50 mortar can be applied in the layers of thickness of 3 to 50 mm, as a composite screed on a separating layer or as a floating base.

• The mortar can also be used in floor heating systems applications.

CEKOL WG-50 is a dry mixture of synthetic gypsum, mineral fillers and modifying additives.


APPLICATION

PREPARATION OF THE SUBSTRATE

The substrate should be clean, compact, carrying and free of grease. Before covering, the base must be stabilized and dry. Tensile strength of the base, in the case of composite layer, should be greater than 1.5 MPa.


PRIMING

Before covering, the substrate should be primed twice with CEKOL DL-80 emulsion. The screed should be separated from walls and expansion joints existing in the substrate should be moved to the surface after binding. The maximum single surface without internal expansion joints is 50 m2. In the case of very weak substrates, CEKOL WG-50 screed should be made on a separating layer. The thickness of the base on a separating layer and as a floating primer should be minimum 35 mm. The thickness over the heating element – at least 10 mm.


PREPARATION OF THE SUBSTRATE

Pour the contents of the package into the water in a proportion of about 7 litres of water per 20 kg of dry powder and mix until a uniform mixture is obtained. After 5 min. mix the mortar thoroughly again. The mortar should be used within 30 minutes from mixing. In the case of mechanical covering, find the right amount of water to reach the desired consistence.


LAYING AND CURING

Cover the ready substrate with the liquid mortar and level with a trowel or a patch and vent with a spiked roller, brush or rake. When laid, the fresh mortar must be protected from direct sunlight and sufficient ventilation in the room must be provided. In the case of heated surface, turn off the floor heating before covering. It can be turned on after 7 days.


FURTHER WORKS

Floor coverings, parquet, panels and ceramic tiles can be laid when the screed is completely dry (less than 1% of moisture). In the event of tarnish on the surface it should be grinded down, which will facilitate and speed up the drying process. Before sticking ceramic tiles it is recommended to prime the surface with CEKOL GS-83 KONTAKT. Stick the tiles using the two-sided method preferably, using flexible adhesives such as CEKOL C-10 or CEKOL C-11. Available for pedestrian traffic: ~ 6 hours at + 18ºC. Drying time: ~1.5 mm per day. Coverage: ~ 15 kg/m²/1cm of layer thickness. Work temperature: +5ºC to + 25ºC.


If you have questions about CEKOL WG-50 Non-Shrink Self-Levelling Screed 20kg please call us on 02038839057! You can also text us back in our live chat.


Please find all datasheets in PDF & BROCHURES section.

Bee with us!! 02038839057

[email protected]


Building Materials Shop

Write a review

Note: HTML is not translated!
    Bad           Good

Get best price of CEKOL WG-50 Non-Shrink Self-Levelling Screed 20kg?

When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

pdf brochures
Size Chart