229889728003396
EWI-005 Silicone Paint - 15 litre

EWI-005 Silicone Paint - 15 litre

  • Documentation
  • 0 reviews
    £54.11 EX VAT £64.93 INC VAT

    Additional Info

    Brand:
    Ewi System
    Product Code:
    C-1264
    • Speak to an insulation expert:
      Get in touch with us over our LIVE CHAT or 02038839057
    • Application:
      It can be used for painting over an existing render in order to refresh the facade and create a finish that looks brand new, or it can be painted over our Mineral Render to seal the render in.
    • Type:
      Silicone Paint
    • Product Size:
      15L Tube
    • Estimated Delivery:
      1-3 Working Days

    Product Description

    EWI-005 Silicone Paint - 15 litre

    EWI-005 Silicone Paint - 15 litre


    EWI-005 Silicone Paint - 15 litre is a high-performance masonry paint. It can be used for painting over an existing render in order to refresh the facade and create a finish that looks brand new, or it can be painted over our Mineral Render to seal the render in.

    Depending on the weather conditions, EWI-005 Silicone Paint - 15 litre should be applied 3-7 days after the Mineral Render has been applied to the substrate. This will ensure that a strong physical and chemical bond forms between the Mineral Render and the masonry paint.


    Preparation

    Before application, the surface of the substrate must be clean and dry. Surfaces that are not intended for painting must be adequately protected. Check that the Silicone Paint is the requested colour. Mix Silicone Paint thoroughly within its container to ensure an even distribution of colour pigments. When using more than one tin of paint for the same surface, ensure that the batch numbers are matched.


    Application

    Apply the masonry paint using brushes, rollers or spray equipment. Best practice when using a silicone-based paint is to apply the paint to the substrate in a continuous manner one wall/surface at a time. This will ensure that there are no visible drying lines where sections of paint meet. When used as a topcoat to our Mineral Render system, the masonry paint should be applied 3-7 days after rendering and at the latest 21 days after rendering, depending on weather conditions. When painting over the top of multi-layer render coats, the last layer must be 7 days old.

    Paints with intense colours (reflection coefficient Y < 20%) should not be used for large facades; the resulting temperature and UV radiation in these conditions may reduce the durability of paint coats and may cause colour fading.


    Key Facts

    -Internal/external use

    -Frost-proof

    -Vapour permeable

    -Hydrophobic

    -Resistant to algae and plant growth

    -For use with Mineral Render or as a standalone finish

    -Application temperature (air, substrate, materials): from +5°C to +25°C

    -Number of coats required: 1

    -Drying time: approx. 12 hours at +20°C

    -Quantity to be used for single coats: approx. 150-250 ml/m² (depending on the absorptive capacity, substrate structure and application method)


    Intended Uses

    Our EWI-005 Silicone Paint (Colour Equalisation Paint) is designed for application on skim-coat mineral plaster surfaces, such as our Mineral render EWI-060. Depending on weather conditions, the product should be applied 3-7 days after the mineral render has been applied to the substrate – this will ensure proper physical and chemical bonding between the plaster coat and colour equalization paint


    Application Conditions

    -Application temperature (air, substrate, materials): from +5°C to +25°C

    -Number of coats required: 1

    -Drying time: approx. 12 hours at +20°C

    -Quantity to be used for single coats: about 150-250 ml/m² (depending on the absorptive capacity, substrate structure and application method)


    Storage Conditions

    Shelf life: up to 12 months from the date of manufacture. Keep dry and in the original packaging at a temperature of +5°C to +25°C.


    Application

    Apply using brushes, rollers or spray equipment. Paint one surface continuously before moving onto the next surface – do not allow any parts of the painted surface to dry out in the process to avoid visible lines. Depending on weather conditions, the product should be applied after 3-7 days, and at the latest 21 days after rendering. In case of multi-layer render coats, the last layer must be 7 days old, although a single layer is usually sufficient. 


    If you have questions about EWI-005 Silicone Paint - 15 litre please call us on 02038839057! You can also text us back in our live chat.


    Please find all datasheets in PDF & BROCHURES section.

    Bee with us!! 02038839057

    [email protected]


    InsulationBee Shop

    EWI-005 Silicone Paint - 15 litre

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Get best price of EWI-005 Silicone Paint - 15 litre?

    When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

    The total time it takes to receive your order is shown below:

    The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

    Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

    Shipping from your local warehouse is significantly faster. Some charges may apply.

    In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

    All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

    Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

    While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

    Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

    pdf brochures
    Size Chart