229889728003396
EWI-060 Mineral Render - 25kg

EWI-060 Mineral Render - 25kg

  • Documentation
  • 0 reviews
    £14.24 EX VAT £17.09 INC VAT

    Additional Info

    Brand:
    Ewi Render Systems
    Product Code:
    C-1254
    • Application:
      Is designed to be either applied by hand or spray machine as part of an external insulation system or on a thin-coat render-only system.
    • Type:
      Mineral Render
    • Product Size:
      25kg
    • Pack Coverage:
      1.5mm: 9–10m2 per 25kg bag (once mixed with water). Please note: alternative grain sizes are available, subject to minimum order quantities and lead times.
    • Estimated Delivery:
      1-3 Working Days
    • Speak to an insulation expert:
      Get in touch with us over our LIVE CHAT or 02038839057

    Product Description

    EWI-060 Mineral Render - 25kg

    EWI-060 Mineral Render - 25kg


    EWI-060 Mineral Render - 25kg is sold in the 1.5mm grain size but is also available in three other grain sizes. 

    EWI-060 Mineral Render - 25kg is designed to be either applied by hand or spray machine as part of an external insulation system or on a thin-coat render-only system. The Mineral Render needs to be sealed with an approved silicone external masonry paint to ensure the product performance is consistent. Warning: without Silicone Paint application, the topcoat will not be sealed and will increase the risk of lime bloom. This render is suitable for application onto EPS and Mineral Wool external wall insulation systems. It is a fabulous finish when installing with the Mineral Wool system, as it helps to provide a completely breathable system.


    Key Facts

    -Waterproof (once sealed with Silicone Paint)

    -Frost-proof (once sealed with Silicone Paint)

    -Vapour-permeable

    -UV-resistant

    -High grip

    -Composition mineral binding agents, mineral fillers, modifying additives

    -Bulk density (dry mixture) about 1.40 g/cm³

    -Adhesion to concrete (air-dry) ≥ 0.3 MPa

    -Adhesion to polystyrene ≥ 0.08 MPa (rupture in thermal insulation material)

    -Soluble chromium (VI) concentration ≤ 0.0002%

    -Substrate primer EWI-330

    -Application and setting temperature (air, substrate, materials): from +5°C to +25°C

    -Water mix proportions approx. 6.5 l of water per 25 kg of dry mix

    -Time to use after mixing with water about 2 hours (temperature +20°C and air humidity approx. 60%)

    -Quantity to be used 2.4kg / m2 for 1.5mm render


    EWI-060 Mineral Render - 25kg


    Preparation:

    Because Mineral Render comes as a dry mix, it needs combining with water before application. You can do this using a mechanical mixture or manually with a paddle mix.


    Application

    EWI-060 Mineral Render - 25kg is applied to the substrate using a notched trowel. The render should be applied at a thickness that corresponds with the chosen grain size. For example, with a grain size of 1.5mm, the render should be applied at 1.5mm thick.


    Once you’ve applied the Mineral Render it should take roughly 12 hours to dry (depending upon the weather conditions). Once set, you will need to use the EWI-005 Silicone paint to seal it. You can apply our silicone paint with a spray machine, a roller or simply by using a paintbrush.


    Application Conditions 

    Render primer: EWI-330 Mineral/ Acrylic Primer

    Application and setting temperature (air, substrate, materials): from +5°C to +25°C

    Grain size distribution: 1.5mm

    Colours: a range of 380 colours when painted with coloured Silicone Paint

    Coverage Rates 

    1.5mm: 9–10m2 per 25kg bag (once mixed with water).

    Please note: alternative grain sizes are available, subject to minimum order quantities and lead times.


    Storage Conditions 

    Comes in powder form in a 25kg paper bag.


    Store in a cool, dry place. Avoid ingress of water. Shelf life: up to 12 months from the date of manufacture.


    Application

    Apply the render using a stainless-steel trowel to the substrate surface. The optimal thickness of the render is equal to the grain size and is achieved by removing any excess product from the substrate. To ensure an even textured finish, immediately rub up the surface of the render using circular motions with a plastic render float.

    Allow the render to dry completely before applying the final coat of Silicone paint. Works must be protected from rain, snow, strong winds and direct sunlight.

    The average drying time for Acrylic render is 12-48 hours depending on weather conditions. The drying period may be significantly longer in low temperatures and high relative humidity


    If you have questions about EWI-060 Mineral Render - 25kg please call us on 02038839057! You can also text us back in our live chat.


    Please find all datasheets in PDF & BROCHURES section.

    Bee with us!! 02038839057

    [email protected]


    InsulationBee Shop

    EWI-060 Mineral Render - 25kg

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Get best price of EWI-060 Mineral Render - 25kg?

    When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

    The total time it takes to receive your order is shown below:

    The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

    Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

    Shipping from your local warehouse is significantly faster. Some charges may apply.

    In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

    All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

    Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

    While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

    Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

    pdf brochures
    Size Chart