Masonry cavity walls comprise of an outer skin of brick or blockwork, and an inner skin of masonry. In new buildings, the inner skin is usually blockwork. Between the two masonry leafs is an air cavity, into which thermal insulation is installed to meet building performance targets. A partial fill cavity features rigid insulation boards secured to the inner leaf masonry, leaving an air cavity behind the outer leaf.
Partial fill external walls can contribute to a whole-building solution that meets the energy efficiency target for new-build construction. They are particularly well suited to extensions of existing buildings, where the U-value targets tend to be less onerous
High performance, partial fill insulation offers the following benefits:
- Easy to fit between wall ties using cavity tie clips for retention.
- Reliable long-term energy savings for buildings.
- Low emissivity foil facers improve thermal performance of air cavity.
- Excellent dimensional stability.
What products are suitable as partial fill cavity insulation?
Offered specifically for partial fill cavity wall applications, Celotex CW4000 is sized specifically to fit standard wall tie spacing requirements. No cutting is required, so it can be installed quickly and easily as the brick and blockwork courses progress.
WHY IS PARTIAL FILL CAVITY CONSTRUCTION SO COMMON ?
Using rigid insulation boards in conjunction with a minimum 50mm air cavity is a tried and tested solution familiar to designers, specifiers, contractors and building inspectors alike. It is a popular method for constructing external walls in the UK, and has been used on building sites for the last hundred years.
The clear cavity between the outer leaf and the insulation acts as a barrier to external moisture, stopping it from reaching the inside of the building. Most commonly, the outer skin of the cavity wall is constructed from brick. Blockwork is also used, clad or rendered to provide the desired finish.
100mm Cellecta Hexatherm XR Roughened Render Insulation Board ( Pack-4)100mm Cellecta XR insulation boards have a roughen face to allow a render to key. They have an excellent thermal performance, closed cell structure and low water absorption, making them ideal for rendering applications.Key Benefits- Excellent life-long thermal performance- Rough..
VAT £80.89 INC VAT
100mm Celotex CW4000 Partial Fill Cavity Wall (6/pack)A partial fill insulation solution for masonry cavity walls, 100mm Celotex CW4000 Partial Fill Cavity Wall (6/pack) is a rigid polyisocyanurate (PIR) insulation board with high thermal performance, suitable for use in new buildings and extensions. Sized to fit between cavity wall ties, it is lig..
VAT £39.98 INC VAT
100mm Celotex GA4000 PIR insulation for floors-walls-roofs 100mm Celotex GA4000 PIR insulation for floors-walls-roofs is a general purpose insulation board for floors, walls and roofs. It has long been at the heart of the Celotex product range providing the user with a range of thermal insulation solutions. With low emissivity foil facings, GA..
VAT £93.72 INC VAT
Kay Metzeler EPS70 Expanded PolystyreneAn expanded polystyrene insulation board ideal for floor and wall insulation, Kay-Metzeler EPS70 provide a long lasting thermal solution. The polystyrene board is easy to cut to any shape making it ideal to fit to any space.Expanded Polystyrene (EPS) is proven in use over decades across the globe for const..
VAT £325.94 INC VAT
100mm Kingspan Kooltherm K12 Framing Board ( Pack-3 )Premium performance framing insulation for timber and steel framming systemsKingspan Kooltherm K12 Framing Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core.Manufactured with a blowing agent that has zero ODP and low GWP, it is used to i..
VAT £293.68 INC VAT
100mm Kingspan Kooltherm K15 Rainscreen Board ( Pack-3 )Premium performance 100mm insulation for use behind rainscreen or masonry façade systemsKingspan Kooltherm K15 Rainscreen Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core.It is manufactured with a blowing agent that has zero Ozone Depletion Potential (O..
100mm Kingspan Kooltherm K7 Pitched Roof Board (3-pack)Premium performance pitched roof insulationINSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACESKingspan Kooltherm K7 Pitched Roof Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core and a low emissivity foil outer face.Manufactured with a blowing agent t..
VAT £63.22 INC VAT
100mm Kingspan Thermapitch TP10 pitched warm roof Insulation100mm Kingspan Thermapitch TP10 pitched warm roof Insulation is a high performance insulation with a fibre-free rigid thermoset polyisocyanurate (PIR) core.It is suitable for tiled or slated pitched warm roof spaces, and has a thermal conductivity of 0.022 W/m·K.Thickness: 100mmSize: 2400x..
VAT £74.98 INC VAT
Kingspan Thermawall TW55Kingspan Thermawall TW55 is a high performance insulation with a fibre-free rigid thermoset polyisocyanurate (PIR) core.It is used to insulate timber and steel framing systems, and has a thermal conductivity of 0.022 W/m·K. -Thickness: 100mm -Available Thickness : 20mm,25mm,30,mm,40mm,50mm,60mm,&nb..
100mm Knauf Earthwool Flexible Insulation Slab (pack-6)100mm Earthwool Flexible Slabs are high performance non-combustible Rock Mineral Wool slabs with flexible edges on all four sides, manufactured using our revolutionary ECOSE® Technology, and are designed for use in multiple applications. Product SpecificationsThickness: 40mm, 50mm, 60mm, 7..
VAT £3,434.66 INC VAT
100mm Knauf Earthwool Rafter Insulation Roll (24-Pallet)100mm Earthwool Rafter Rolls are high performance, non-combustible Glass Mineral Wool insulation rolls, manufactured using our revolutionary ECOSE® Technology, designed for use in warm roofs and Loft conversions where pitched roofs are insulated at rafter level.Product DetailsThickn..
100mm Knauf RS100 Mineral Wool Earthwool Building Slab (pack-3)Earthwool Building Slabs are non-combustible Rock Mineral Wool slabs, manufactured using our revolutionary ECOSE® Technology in a range of densities, and are designed for use in multiple applications.Earthwool Building Slab RS100 is manufactured with a density of 100kg/m3, designed for ..
VAT £31.20 INC VAT
Polystyrene EPS Facade white External Premium (White) EPS Board is used for external wall insulation. It works well in conjunction with a finish of timber or plastic weatherboarding, tile hanging or any other cladding or reinforced-render systems. Thickness: 100mmLenght: 1000 mmWidth: 500 mmAvailable thicknesses: 10mm,20mm,30mm,50mm,80mm,100..
100mm Ravatherm XPS X 200 SB Extruded Polystyrene Board For floors And WallsHigh-performance, multi-purpose extruded polystyrene XPS boards for the thermal insulation of domestic and industrial floors, basement and/or cellar perimeter walls.Ravatherm XPS X 200 SB thermal insulation is manufactured by an extrusion process, which results in a homogen..
100mm Ravatherm XPS X 300 SB Multi-Purpose Extruded Polystyrene BoardHigh-performance, multi-purpose extruded polystyrene (XPS) boards for the thermal insulation of domestic and industrial floors, basement and/or cellar perimeter walls.Ravatherm XPS insulation X 300 SB thermal insulation is manufactured by an extrusion process, which results ..