Jabfloor EPS70 expanded polystyrene - 100mm (3/pack)

Jabfloor EPS70 expanded polystyrene - 100mm (3/pack)

  • Documentation
  • 0 reviews
    £76.82 EX VAT £92.18 INC VAT

    Additional Info

    Brand:
    Jablite
    Product Code:
    C-572
    • Application:
      Insulation board suitable for use in all floor constructions.
    • Type:
      Expanded Polystyrene (EPS).
    • Product Size:
      2400mm x 1200mm
    • Thickness:
      100mm
    • Pack Coverage:
      8.64m2
    • Estimated Delivery:
      3-5 working days

    Product Description

    Jabfloor EPS70 expanded polystyrene - 100mm (3/pack)

    Jablite Jabfloor EPS100 expanded polystyrene

    EPS100 boards can be used to provide successively higher loadbearing capabilities combined with high levels of insulation typically in solid floor applications. Jabfloor 100 is used in offices and schools.
    Jabfloor is a BBA-certified floor insulation that achieves the required U-value and compressive performance on a range of different floor applications:

    • Below ground supported slab
    • Above slab below chipboard
    • Above slab below screed
    • Precast suspended concrete
    • Cold Store

    Thickness: 100mm
    Length: 2400mm
    Width: 1200mm
    Available thicknesses: 50, 75, 100
    Coverage: 8.64m2
    Weight/m2: 2kg
    Pack size: 6 no.
    Brand Name: Kay Metzeler
    Thermal conductivity: 0.036 W/mK
    Thermal Resistance : 2.78 m2K/W
    Maximum Thermal Conductivity at 10oC: 0.038W/mK
    Compressive Strength at 10% Compression: 100kPa
    Compressive stress at Compression 1%; 45kPa
    Water vapour resistance: 200 MNs/g
    Nominal Density: 20kg/m3
    Material: Polystyrene

    Key Benefits
    BBA accredited, certificate 87/1796.
    Provides cost effective insulation for the lifetime of the building
    Excellent compression properties
    100% recyclable
    Achieves an A+ rating in the BRE Green Guide to Specification
    Available with Class E fire retardant additive
    Flood proof
    Lightweight and easy to handle
    Is non-toxic and biologically inert
    Also available as a High Performance (HP) product

     

    Jablite board
    The use of Jablite board will reduce the amount of heat entering the cold store from the surrounding sub-base. This helps to maintain the ambient ground temperature and to reduce the incidence of ground heave caused by freezing soils.

    Fire
    Solid ground floors are not required to provide fire resistance. When properly installed, the EPS insulation is fully protected by the wearing surface and will have no adverse effect on the fire performance of the floor. Euroclass E, flame-retardant additive material is available to order.

    Rapid construction
    No specialised trades or equipment are required.

    Versatile
    Jablite board is available in various grades allowing the optimum selection of wearing surface/slab and insulation to support distributed loads up to 100kPa.

    Environment
    Expanded polystyrene has been awarded an A+ rating by the BRE’s Green Guide to Specification.

    Thermal insulation
    Unlike a conventional flooring application, in the case of a coldstore floor, the insulation is intended to prevent heat transfer between the comparatively warm surrounding soil and the cold concrete floor. The rate of heat transfer will be directly dependent on the temperature difference between the two, and a suitable
    thickness of insulation should be selected to reduce this figure to an acceptable level within the constraints of the refrigeration plant. Jablite board suffers no loss of efficiency at normal cold-store temperatures

    Site preparation
    The ground should be excavated to the required level, and compacted to ensure that the surface is firm and flat. The sub-base must be clean and free from contaminants, and placed in layers of sufficient thickness to allow adequate compaction of each layer. If necessary, the top layer should be blinded to receive a
    screed. The thickness of screed will depend on whether it acts simply as a blinding layer, or whether it is a carrier for heating cables intended to prevent ground heave
    in low temperature applications. In either case the top surface should be flat and even to receive a membrane and base slab. The base slab, which may include frost
    heave protection in lieu of that in the sub-base, should be laid to the required thickness.

    Jabfloor EPS70 expanded polystyrene - 100mm (3/pack)

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Get best price of Jabfloor EPS70 expanded polystyrene - 100mm (3/pack)?

    When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

    The total time it takes to receive your order is shown below:

    The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

    Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

    Shipping from your local warehouse is significantly faster. Some charges may apply.

    In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

    All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

    Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.

    While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

    Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

    pdf brochures
    Size Chart