ProWarm Electric Underfloor Heating 100W Sticky Mat ( 16m2 / 2mats )
Heating mats for kitchens, dining rooms, large bathrooms, and most other areas with tiled floors.
Electric Underfloor Heating Mat
32m x 500mm
1-3 Working Days
ProWarm Electric Underfloor Heating 100w Sticky Mat ProWarm Electric Underfloor Heating 100w Sticky Mat is suitable as a primary heating source providing you have adequate insulation. These are our most commonly used heating mats for kitchens, dining rooms, large bathrooms, and most other areas with tiled floors.
Heating Type: Electric Systems
Twin Conductor: 100W
Resistance: 529.00 (Ohms)
Floor Construction Suitability: Concrete & Timber
Suitable for: Under Tiles
Material: Fluropolymer coated resistive electrical heating elements
Pack Quantity: 1
Years Guaranteed: 25
Type: Underfloor Heating Mats
ProWarm Electric Underfloor Heating 100w Sticky Mat Kit:
All of our heating mats can be laid either way up, they have a sticky mesh on one side and three strips of double sided tape on the other side.This means that the heating mat can be firmly held in place whether it is installed with the cables facing down or facing up making your installation easier.NOTE: You may still need to use small pieces of duct tape to hold the mat in certain places to prevent it from rising when using a levelling compound.
Before you begin Installing:
Please read through these instructions carefully and check that you have all the components required. ProWarm Electric Underfloor Heating 100w Sticky Mat - 1m2 is designed for installation below most tile/stone floor coverings, it may also be installed below engineered/laminate wood floors, vinyl and low tog thin carpets but in these cases the heating mat/s must be first covered with an 8-10mm thick suitable latex based levelling compound.
Always check with the floor covering manufacturer for suitability of use with electric Underfloor heating systems, also check the suitability of any adhesives/latex compounds that are intended to be used with both the floor coverings and the heating system.
Do’s for Installation
-Do read through these instructions carefully before beginning work.
-Do use flexible adhesives and grouts.
-Do test the cable before tiling.
-Do be careful not to damage or dislodge the cable during tiling.
-Do ensure the cable is spaced no closer than 50mm between loops.
-Do try to protect the cable with cardboard or carpet during tiling.
-Do wait at least 7 days before turning on the system.
-Do read the separate installation and operating instructions for the thermostat.
-Do ensure the joint between the cold tails and heating cable is beneath the tiles.
Dont’s for Installation
-Don’t attempt to cut the heating cable at any point.
-Don’t allow the wires to cross or touch.
-Don’t allow excessive foot traffic over the wire before tiling.
-Don’t cut tiles over the heating cable.
-Don’t place tools or stacks of tiles on top of cable.
-Don’t place any product over the floor covering that has a higher tog value than 2.5.
-Don’t place any bean bags or fixed furniture over the floor covering.
-Don’t place cable closer than 100mm near any pipes.
-Don’t turn on the heating mat/cable while it is rolled up or still on the drum.
-Don’t tape over the end joint or the cold tail joint
Please ensure that the cold tail joint (the join between the heating cable and flexible supply lead)
is fully encapsulated in adhesive or levelling compound underneath the floor covering.
Please ensure that the end joint (the join at the end of the cable which is black) is also fully
encapsulated in tile adhesive or levelling compound underneath the floor covering.
Both the cold tail joint and end joint MUST NOT be covered with tape, this can cause the cable to
overheat and eventually fail!
DO NOT BEND THE COLD TAIL JOINT AT ANY POINT
ProWarm Electric Underfloor Heating 100w Sticky Mat come with a full lifetime warranty
The warranty does not cover installations made by unauthorized persons or faults caused by incorrect design by others / misuse / damage caused by others / damage in transit / incorrect installation and any other subsequent damage that may occur. Replacement will be fully chargeable if the damage is because of any of the above reasons.
- The system requires a mains voltage 230/240v and must be connected by a suitably qualified person.
All wiring must conform to lEE 17th Edition Part P regulations.
- The cold tail on the mat is coloured black and is a twin core and earth cable, or in some instances it may
have a silver earth braiding wrap around the twin cores. The heating element also contains a built in return
meaning that it only has to be connected to the thermostat from one end.
- For larger areas, if two or more mats are supplied, it will be necessary to use a connection or junction box to
join the heating mats (cold leads) together prior to connecting a single cable to the thermostat (Wire used
must be of a suitable size, selected by an electrician). MAX Load on one thermostat 16Amps.
- The electrical and electromagnetic fields generated are negligible and well within all recommended European
and International guidelines.
- The heating mats must not overlap and the heating cable MUST NOT be cut or cross at any point.
- The joint between the heating cable, cold tail and end joint MUST be located under the floor and
encapsulated in self levelling or tile adhesive and MUST NOT be taped over.
Find all our Thermostats here
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!
All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.
Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your ordershould an additional delivery charge apply.
While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.
Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.